Aller au contenu
Instrumentation et régulation de procédés industriels 04 42 70 74 04 contact@prismainstruments.com EntrepriseBlog FR EN

Orifice Plate Assemblies with RTJ Holder

Prix et délai sur devis
Orifice Plate Assemblies with RTJ HolderCliquez pour agrandir

Caractéristiques

ParticularitéSpécifications
ParticularitéDesign
ParticularitéConforms to ISA RP 3.2 , DIN 1952 , BS 1042, ISO-5167
ParticularitéTypes
ParticularitéSquare edge concentric, Quadrant edged, Conical entrance, Eccentric, Segmental
ParticularitéPlate material
ParticularitéSS304 , SS316 , SS316L as standard. Hastelloy-C , Monel , PP , PVC , PTFE coated , etc. can be given on request.
ParticularitéOrifice Bore
ParticularitéIn accordance with ISO-5167, BS-1042, ASME MFC 3M, R.W.Miller, L.K.Spink, AGA-3
ParticularitéTab Plate
ParticularitéIn the same material as plate & is welded to orifice plate. Tab plate integral to the Orifice plate (i.e. without welding) can also be offered as a special case.
ParticularitéVent / Drain
ParticularitéVent or Drain holes are provided as per customer's requirement. The diameter of the vent or drain holes are as per ISA RP 3.2
ParticularitéFlange UnionWeld neck, Slip on, Threaded, Socket welded with RF or RTJ facing Orifice flanges are in accordance with ANSI B16.36 with minimum flange rating of 300# for sizes up to 8" or male - female flanges in accordance with ANSI B16.5
ParticularitéPressure Tappings
ParticularitéCorner tappings are recommended for sizes upto 1 ½"; Flange taps from 2" to 16" ; D - D/2 taps for higher sizes
GasketCAF as per IS2712 Gr 0/1 , SS spiral wound + CAF , SS spiral wound + Grafoil, SS spiral wound + PTFE are normally supplied as per process requirement. Other materials available on request. For RTJ flanges , the plate is fixed on the plate holder. The plate holder is in Soft Iron material & acts as a gasket. Studs / NutsASTM A193 Gr.B7/A-194 Gr.2H as standard, Other material on request.
ParticularitéJack ScrewASTM A193 Gr.B7/A-194 Gr.2H as standard, Other material on request.

Description

The Plate Holder Assembly is a combination of plate holder and an orifice plate designed for ring tongue joint (RTJ) flanges. The plate holder has a function of holding the orifice plate and also a function as a gasket to prevent leakage of the process fluid. The plate holder has a oval or octagonal ring for mounting between ring tongue joint flanges. This metallic sealing system is applicable to a fluid of high temperature and high pressure.

The pressure tapping system normally is of the flange tap type.

Orifice plate is screwed to the plate holder. Generally the plate holder is of soft iron material. The Orifice plate is available in standard material such as SS316, SS304, SS316L, Monel, Hastelloy-C, etc. Other materials are available on request. The plate holder along with the orifice plate can be also machined from one piece. RTJ holder material is selected so that the RTJ holder hardness is less than that of flange hardness.

Téléchargements

Modèles voisins

AjoutéVoir ma demande