Aller au contenu
Instrumentation et régulation de procédés industriels 04 42 70 74 04 contact@prismainstruments.com EntrepriseBlog FR EN

Nickel Wire Mineral Insulated RTDs

Prix et délai sur devis
Nickel Wire Mineral Insulated RTDsCliquez pour agrandir

Caractéristiques

ParticularitéState-of-the-art Laser Welding adopted to weld element to transducer case and bulb to sheath.
ParticularitéHigh integrity construction.
ParticularitéHigh accuracy, repeatability.
ParticularitéHigh insulation resistance (>100 M ohm @ 500 VDC at 250C)
ParticularitéWide operating range i.e. (-) 2000C to 8000C
ParticularitéFast response
ParticularitéSheath can be bent / routed to suit installation without affecting performance.
ParticularitéAvailable in variety of sheath diameters.
ParticularitéTwo , three and four wire configuration
ParticularitéCalibration in accordance with IEC 751
ParticularitéClass A type or 1/3rd DIN with special limits of error optional#.
ParticularitéSuitable for head mounted transmitters.

Description

Prisma Instruments provides RTDs with Nickel conductor in Mineral Insulated Construction. The basic difference between the conventional & Nickel conductor is material of conductor. In conventional, it is copper as against Nickel in Newly developed MI.

1- Most important advantage is that the RTD element is welded on to conductors and not brazed. As such same RTD can be used for much higher temperature of up to 600 degree celsius. In conventional RTD with copper conductor, brazing does not allow use of RTD above 450 degree celsius, after which brazing starts softening and RTD loses its contact with cable conductors. In Nickel conductors, as Nickel can be welded, contact is much more stronger even at higher temperature. 2- Nickel conductor cables are annealed at higher temperature than that of Copper. The cable therefore is much more softer. Hence RTDs made with nickel conductor are more pliable and easier to use 3- Nickel has much more strength than copper. Hence, they can be directly terminated in the terminal block avoiding another connection of flexible leads. RTDs with Nickel conductors give steady readings and chances of loose connection of flexible leads to copper wires is avoided. 4- As Nickel conductors are welded to RTD element, it is a much more stable design than brazed RTD. This advantage is very important in applications where vibrations are present. 5- Copper can get easily oxidised causing fluctuations in readings. Nickel being much more inert chemically, is not so prone to oxidation and hence gives stable readings over a longer period of time.

Téléchargements

Modèles voisins

AjoutéVoir ma demande