Aller au contenu
Instrumentation et régulation de procédés industriels 04 42 70 74 04 contact@prismainstruments.com EntrepriseBlog FR EN

Mineral Insulated RTD

Prix et délai sur devis
Mineral Insulated RTDCliquez pour agrandir

Caractéristiques

ParticularitéState-of-the-art Laser Welding adopted to weld element to transducer case and bulb to sheath.
ParticularitéHigh integrity construction.
ParticularitéHigh accuracy, repeatability.
ParticularitéHigh insulation resistance (>100 M ohm @ 500 VDC at 250C)
ParticularitéWide operating range i.e. (-) 2000C to 8000C
ParticularitéFast response
ParticularitéSheath can be bent / routed to suit installation without affecting performance.
ParticularitéAvailable in variety of sheath diameters.
ParticularitéTwo , three and four wire configuration
ParticularitéCalibration in accordance with IEC 751
ParticularitéClass A type or 1/3rd DIN with special limits of error optional#.
ParticularitéSuitable for head mounted transmitters.

Description

RTD - Resistance Temperature Detector used for temperature measurement (-) 200°C to 500°C (upto 800°C on request), must have the physical configuration necessary for optimum thermal response to the process fluid it is sensing and the resistive element compatible with instrumentation.

Our fully equipped measurement and testing laboratory maintains primary reference standard calibrated and duly certified to national standards. These are used for the calibration of all RTDs we manufacture.

Various considerations apply to the design of RTD assemblies. The element should be protected from shock and vibration, yet free of expansion stresses that may shift the reading. The element assembly needs to be isolated without obstructing heat flow. The outer sheath has to withstand pressure, erosion and vibration, yet it should be small enough for easy installation and rapid response to temperature changes.

Téléchargements

Modèles voisins

AjoutéVoir ma demande